'----------------------------------------------------------------
'SHOPBOT ROUTER FILE IN MM
'GENERATED BY PARTWorks
'Minimum extent in X = 0.000 Minimum extent in Y = 0.000 Minimum extent in Z = -15.000
'Maximum extent in X = 2400.000 Maximum extent in Y = 1200.000 Maximum extent in Z = 0.000
'Length of material in X = 2400.000
'Length of material in Y = 1200.000
'Depth of material in Z = 15.000
'Home Position Information = Bottom Left Corner, Material Surface 
'Home X = 0.000000 Home Y = 0.000000 Home Z = 20.000000
'Rapid clearance gap or Safe Z = 6.000
'UNITS:MM
'
IF %(25)=0 THEN GOTO UNIT_ERROR	'check to see software is set to standard
SA                             	'Set program to absolute coordinate mode
CN, 90
'New Path
'Toolpath Name = Drill 1
'Tool Name   = 1/4" Straight  (48-005)

&PWSafeZ = 6.000
&PWZorigin = Material Surface
&PWMaterial = 15.000
'&ToolName = "1/4" Straight  (48-005)"
&Tool =2                    'Jog Z axis to safe height
C9
TR,11000
C6                   'Return tool to home in x and y
PAUSE 2
'
MS,101.2,25.3
JZ,20.000000
J2,0.000000,0.000000
J3,11.343000,31.547001,6.000000
M3,11.343000,31.547001,-5.000000
J3,11.343000,31.547001,6.000000
J3,351.420013,167.740005,6.000000
M3,351.420013,167.740005,-5.000000
J3,351.420013,167.740005,6.000000
J3,435.910004,819.158997,6.000000
M3,435.910004,819.158997,-5.000000
J3,435.910004,819.158997,6.000000
J3,220.203995,1155.905029,6.000000
M3,220.203995,1155.905029,-5.000000
J3,220.203995,1155.905029,6.000000
J3,879.369019,622.741028,6.000000
M3,879.369019,622.741028,-5.000000
J3,879.369019,622.741028,6.000000
J3,1205.381958,736.137024,6.000000
M3,1205.381958,736.137024,-5.000000
J3,1205.381958,736.137024,6.000000
J3,1541.520020,1104.673950,6.000000
M3,1541.520020,1104.673950,-5.000000
J3,1541.520020,1104.673950,6.000000
J3,2008.620972,700.700989,6.000000
M3,2008.620972,700.700989,-5.000000
J3,2008.620972,700.700989,6.000000
J3,2322.762939,1124.163940,6.000000
M3,2322.762939,1124.163940,-5.000000
J3,2322.762939,1124.163940,6.000000
J3,2344.910889,45.257000,6.000000
M3,2344.910889,45.257000,-5.000000
J3,2344.910889,45.257000,6.000000
J3,1197.030029,177.460007,6.000000
M3,1197.030029,177.460007,-5.000000
J3,1197.030029,177.460007,6.000000
JZ,20.000000
J2,0.000000,0.000000
'
'Turning router OFF
C7
END
'
'
UNIT_ERROR:
CN, 91                            'Run file explaining unit error
END